Installing The Idrac Ports Card - Dell PowerEdge T430 Owner's Manual

Figure 43. Removing and installing the iDRAC ports card
1. iDRAC ports card holder
3. SD vFlash media card
5. captive screw (2)
Related Links
Removing the cooling shroud
Removing the internal cooling fan

Installing the iDRAC ports card

Installing the iDRAC ports card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Follow the procedure listed in
3. Keep the #2 Phillips screwdriver ready.
4. Remove the cooling shroud.
5. Remove the internal cooling fan.
106
Safety instructions.
Before working inside your
2. iDRAC port
4. iDRAC ports card
6. iDRAC ports card connector
system.