Installing The Lcd Module - Dell PowerEdge T430 Owner's Manual

Figure 62. Removing and Installing the LCD Module
1. LCD module
3. LCD cable
5. LCD cable connector
Related Links
Removing the control panel assembly
Removing the control panel assembly cover

Installing the LCD module

Installing the LCD module
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Keep the #2 Phillips screwdriver ready.
Steps
1. Align the LCD module with the LCD module slot and insert the LCD module into the control panel.
2. Secure the LCD module to the control panel using the screw.
Next steps
1. Install the control panel assembly cover.
2. Connect the LCD cable, the control panel cable and the control panel USB cable to the control
panel board.
Safety instructions.
2. retention tab
4. screw
137