Installing The Internal Cooling Fan - Dell PowerEdge T430 Owner's Manual

Figure 37. Removing and installing the internal cooling fan
1. internal cooling fan power cable
3. arrow
Related Links
Removing the cooling shroud

Installing the internal cooling fan

Installing the internal cooling fan
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: Do not operate the system with the cover removed for a duration exceeding 5
minutes.
Ensure that you read the
Steps
1. Hold the cooling fan by the sides with the cable end facing the bottom of the chassis.
CAUTION: Do not remove or install the internal cooling fan by holding the fan blades.
2. Align the four tabs on the internal cooling fan with the four slots on the chassis wall.
3. Press and slide the internal cooling fan into the slots until the release tab locks into place.
Safety instructions.
2. release tab
4. internal cooling fan
93