Dell PowerEdge T430 Owner's Manual page 75

Figure 27. Cabling—Cabled hard-drives with a PERC card
1. front-panel HDD LED controller
connector on the system board
3. SATA tape drive connector on system
board
5. SAS connector on PERC card
7. front-panel HDD LED controller
connector on the PERC card
9. tape drive
Next steps
1. Install the internal hard-drive bay into the chassis.
2. If disconnected, reconnect the power and data cable(s) to the remaining hard drive(s) in the internal
hard-drive bay.
Related Links
Removing the internal hard-drive bay
Installing a cabled hard drive
2. SATA optical drive connector on system
board
4. system board
6. PERC card
8. hard drives
10. optical drive
75