Removing Caster Wheels - Dell PowerEdge T430 Owner's Manual

Figure 12. Removing and installing caster wheels
1. support unit
3. slot on base of the tower (4)
5. screw for wheel assembly (2)
Related Links
Removing the system feet

Removing caster wheels

Removing caster wheels
Prerequisites
1. Ensure that you read the
2. Keep the #2 Phillips screwdriver ready.
3. Lay the system on a flat and stable surface with the wheels extending beyond the edge of the
surface.
Steps
1. Remove the screw securing the front wheel unit to the base of the chassis.
2. Offset the front wheel unit slightly to the back of the system to release the retention hooks, and pull
out the front wheel unit.
3. Remove the screw securing the back wheel unit to the base of the chassis.
4. Offset the back wheel unit slightly to the front of the system to release the retention hooks, and pull
out the back wheel unit.
54
Safety instructions.
2. screw for support unit (2)
4. wheel assembly unit (2)