Recommended Tools; Front Bezel (Optional); Installing The Front Bezel - Dell PowerEdge T430 Owner's Manual

4. Reconnect the system to an electrical outlet and peripherals.
5. Power on the system, including any attached peripherals.
Related Links
Installing the system cover

Installing the front bezel

Recommended tools

You will need the #2 Phillips screwdriver to perform the removal and installation procedures.

Front bezel (optional)

Installing the front bezel
1. Locate and remove the bezel keys.
NOTE: There are two bezel keys attached to the bezel.
2. Insert the bezel tabs into the bezel tab slots in the chassis.
3. Insert the bezel tabs into the slots on the chassis.
4. Push the top end of the bezel toward the system until the bezel locks into place.
5. Lock the bezel.
Figure 10. Installing and removing the front bezel
1. release latch
50
2. system