Removing The Vga Module - Dell PowerEdge T430 Owner's Manual

3. Install the control panel assembly.
4. Connect the control panel cable, the LCD cable and the control panel USB cable to the system
board.
5. Follow the procedure listed in
Related Links
Installing the control panel assembly cover
Installing the control panel assembly
Removing the LCD module

Removing the VGA module

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Follow the procedure listed in
3. Remove the control panel assembly.
4. Remove the control panel assembly cover.
Steps
Release the hooks securing the VGA module to the control panel board and remove the VGA
module.
Figure 63. Removing and installing the VGA module
1. VGA module
3. hook (2)
Related Links
Removing the control panel assembly
138
After working inside your
Safety instructions.
Before working inside your
system.
system.
2. control panel
4. VGA connector on the control panel
board