Resending A Fax After An Error - Canon MP-C635 User Manual

To Cancel Automatic Redialing
To cancel automatic redialing, press the
STOP
cannot cancel redialing while the LCD displays
waiting to redial). In this case, wait until dialing begins and then press
STOP
To cancel the redialing, press
displays:
The unit then prints an error report:

Resending a Fax After an Error

If you get an error while sending a fax from memory, the MultiPASS can
resend it to the same destination without having to rescan it. To do this,
the On Error Resend option must be set in the Advanced: Send Fax
panel of the MultiPASS Fax Setup Utility. See "Setting Up Advanced Fax
Send Options" in Chapter 3, Using the MultiPASS Fax Setup Utility for
details.
You can also set how much of the fax is sent again:
❍ The entire document (All Pages)
❍ The first page of the document, the page on which the error
occurred, and all following pages (Error & First Pages)
❍ The page on which the error occurred and all pages following the
error (Error Pages)
N
The fax is erased from memory after it is successfully sent or after the
resending fails.
4-8 Sending Faxes With the MultiPASS C635
to cancel redialing. The MultiPASS asks you to confirm:
YES = (*)
TX/RX
TX/RX NO.
PRINTING REPORT
button. However, you
STOP
AUTO REDIAL
NO = (#)
* . The MultiPASS beeps and the LCD
CANCELLED
XXXX
(the unit is
Chapter 4