Table of Contents
Advertisement
Appendix > Character Entry Method
Character Entry Method
To enter characters for a name, use the on-display keyboard in the touch panel following the steps as explained below.
NOTE
QWERTY, QWERTZ and AZERTY are available as keyboard layouts the same as a PC keyboard. Press the System
Menu/Counter key, [Common Settings] and then [Keyboard Layout] to choose desired layout. QWERTY layout is
used here as an example. You may use another layout following the same steps.
Entry Screens
Lower-case Letter Entry Screen
3
4
1
2
GB0057_E01
10
No.
Display/Key
1
Display
2
Keyboard
3
[ABC] / [Symbol]
4
[A/a] / [a/A]
5
Cursor Key
6
[Input] / [Limit] Display
7
Delete Key
8
Space Key
9
Enter Key
10
[Cancel]
11
[< Back]
12
[OK] / [Next >]
5
6
7
8
9
11
12
Displays entered characters.
Press the character to enter.
Select the characters that are entered. To enter symbols or numbers,
select [Symbol].
Press to switch between upper case and lower case.
Press to move the cursor on the display.
Displays maximum number of characters and the number of
characters entered.
Press to delete a character to the left of the cursor.
Press to insert a space.
Press to enter a line break.
Press to cancel entered characters and return to the screen before
the entry was made.
Press to return to the previous screen.
Press to save the entered characters and move to the next screen.
11-7
Description
Advertisement
Table of Contents
