Entering Characters; Character Input Screen; Name Registration Example - Kyocera KM-6230 Instruction Handbook Manual

Section 8 COPIER MANAGEMENT

(5) Entering characters

Follow the procedure below when you want to register names for programs, boxes and other data. Each name can be up to a maximum of 16
characters.

1 Character input screen

There are three different character input screen.
Input screen for uppercase letters
* Use the numeric keys to enter numbers.
* The function of each key:
"a" key: Touch to switch between the screens for inputting upper- and lowercase letters.
"Mode" key: Touch to switch between the screens for inputting symbols and either upper- or lowercase letters.
"Erase" key: Touch to delete all of characters to the right of the cursor.
"O" key / "P" key: Touch to move the cursor to the right or left.
"Space" key: Touch to input a single space in the name you are registering.
"End" key: Touch to register the name you have entered.
"Back" key: Touch to return to the screen prior to character input.
8-29
3. Touch the key that corresponds to the language that you want to use.
* The language will be changed and the touch panel will return to the basic screen.
Input screen for lowercase letters
Touch the "a" key
Touch the "Mode" key

2 Name registration example

To register "Abc&Def":
1. Touch the "a" key to display the screen for inputting uppercase letters.
Input screen for symbols
Touch the "Mode" key