Table of Contents
Advertisement
Sending > Specifying Destination
4
Item
Login User Name
Login Password
For send to folder (FTP)
Item
Host Name
Path
Login User Name
Login Password
Refer to Character Entry Method on page 11-7 for details on entering characters.
Confirm the information.
Check the information. Change the information as needed by pressing the item in question.
Ready to send.
Folder - Confirmation
Host Name
abc
Path
abc
Port
139
Login User Name
abc
Menu
Cancel
< Back
When specifying a computer or server port number as the destination, press [Port] and enter
the port number. You can enter a number from 1 to 65,535 with a maximum of 5 digits.
Confirm the connection status.
Ready to send.
Folder - Confirmation
Host Name
abc
Path
abc
Port
139
1
Login User Name
abc
Menu
Cancel
< Back
Connected. appears when connection to the destination is correctly established. If Cannot
connect. appears, review the entry.
To enter multiple destinations, press [Next Destination] and enter the next destination. You can
specify a combined total of up to 5 FTP and SMB destination folders.
You can register the entered information in the Address Book by pressing [Menu] and then
[Add to Address Book].
Data to be entered
User name to access the PC
Domain name/User name
For example, abcdnet\james.smith.
User name@Domain name
For example, james.smith@abcdnet
Password to access the PC
Data to be entered
Host name or IP address of FTP server
Path to the receiving folder.
For example, \User\ScanData.
Otherwise the data will be saved in the home
directory.
FTP server login user name
FTP server login password
10:10
Use [
] or [
1/2
OK
10:10
1/2
OK
6-20
Max. characters
Up to 64 characters
Up to 64 characters
Max. characters
Up to 64 characters
Up to 128 characters
Up to 64 characters
Up to 64 characters
] to scroll up and down.
Menu
Connection Test
2
Next Destination
Add to Address Book
Close
10:10
1/1
Advertisement
Table of Contents
