Login/Logout; Character Entry Method - Kyocera 6550ci Operation Manual

Login/Logout

If user login administration is enabled, it is necessary to enter the login user name and password to use the
machine.
NOTE:
You will be unable to login if you forget your login user name or login password. In this event, login with
administrator privileges and change your login user name or login password.
If the guest authentication setting is enabled, the Authentication/Logout key must be pressed when logging in.
For details, refer to the Guest Authorization Set. on page 10-12.
Login
Enter login user name and password.
Local
Login to:
Login
abcdef
User Name
Login
********
Password
Check Counter
Status
# Keys
# Keys
ID Card
Login
Cancel Login
10/10/2010 10:10
3-2
1
If the screen shown appears during operations,
press [Login User Name].
Press [# Keys] to enter the login data using the
numeric keys.
2
Enter the login user name and press [OK].
NOTE:
Refer to the Character Entry Method on
Appendix-8 for details on entering characters.
3
Press [Login Password].
Press [# Keys] to enter the login data using the
numeric keys.
4
Enter the password and press [OK].
5
Check the login user name and password are
correct, and press [Login].
NOTE:
If Network Authentication is selected as the
user authentication method, either Local or Network
can be selected as the authentication type.
Basic Operation