Table of Contents
Advertisement
Setup, Registration, and User Management > System Menu
Item
Wide A4
Form Feed TimeOut
LF Action
CR Action
Paper Feed Mode
Gloss Mode
Turn this to on to increase the maximum number of characters that can be printed in a line for
an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at 10 pitch). This
setting is only effective in PCL 6 emulation.
Value: Off, On
Receiving print data from the computer, the machine may sometimes wait if there is no
information signaling that the last page does not have any more data to be printed. When the
preset timeout passes, the machine automatically prints paper. The options are between 5 and
495 seconds.
Value: 5 to 495 seconds
Set the line feed action when the machine receives the line feed code (character code 0AH).
Value: LF Only, LF and CR, Ignore LF
Set the character return action when the machine receives the character return code (character
code 0DH).
Value: CR Only, LF and CR, Ignore CR
While printing from the computer, select how to feed paper when the paper source and type are
specified.
Value
Auto: Search the paper source that matches the selected paper size and type.
Fixed: Print on paper loaded in the specified paper source.
Gloss Mode increases the effect of glossiness in printing by reducing the printing speed by half.
Value: Off, On
IMPORTANT: Gloss Mode is not available when Labels and Transparency is selected as
the paper type setting. (Refer to Cassette/MP Tray Settings on page 9-8.)
Depending on the paper used, printing in gloss mode may cause wrinkle in paper. To
reduce wrinkle, try using thicker paper.
9-17
Description
Advertisement
Table of Contents
