Table of Contents
Advertisement
Setup, Registration, and User Management > System Menu
Keyboard Layout
Item
Keyboard Layout
USB Keyboard Type
Item
USB Keyboard Type
Copy
Configures settings for copying functions.
Item
Auto Paper Selection
Auto % Priority
Reserve Next Priority
*
If you want to enable the changed defaults immediately, move to the function screen and press the Reset key.
Send
Configures settings for sending functions.
Item
Dest. Check before Send
Entry Check for New Dest.
Change the layout of the touch panel keyboard used to enter characters.
Value: QWERTY, QWERTZ, AZERTY
Select the type of USB keyboard that you want to use.
Value: US-English, US-English with Euro
If [Auto] is selected for Paper Selection, set the paper size selection method when the zoom
changes.*
Value
Most Suitable Size: Select paper based on the current zoom and the size of the original.
Same as Original Size: Select paper that matches the size of the original, regardless the zoom.
When a paper source of different size from the original is selected, select whether automatic
zoom (reduce/zoom) is performed.*
Value: Off, On
Once the scan of the original is complete, the basic screen will be displayed, and you can
proceed to the next operation.
Value: Off, On
When performing sending jobs, display the confirmation screen of destinations after pressing
the Start key.
Value: Off, On
When adding new destination, display the entry check screen to check the entered destination.
Value: Off, On
9-15
Description
Description
Description
Description
Advertisement
Table of Contents
