Tuning And Manual Storing Of A Station - Fiat 1998 Marea Service Manual

Electrical equipment
Car radio system
55.

Tuning and manual storing of a station.

Select the frequency band by pressing key BAND (1). The display shows the selected band: "FM1",
"FM2", "FM3", "MW" or "LW".
TP Function (Traffic Program)
Some station in bands RDS1 and RDS2 also broadcast traffic reports.
The TP (Trafic Program) can be used to:
a) search only for RDS stations with traffic reports;
b) receive traffic report even if a cassette is playing;
c) receive traffic reports at a minimum preset level even if the voulme is at zero.
NOTE Below are instructions for carrying out the operations illustrated in points a), b) and c) described
above.
44
Marea-
Marea
Once the band has been selected, press key
" • " or " • " (2,3) for about six seconds until
the message "MAN" and the frequency the ra-
dio is tuned to are displayed. Use keys "A" or
"T" to change the tuning frequency in 50 Hz
steps for FM bands and 1khz for A M .
The station you are listening to can be stored
in the frequncy band selected using the fre-
quency selection keys. When the storage pro-
cess is finished, press the preselected fre-
quency selection key until the sound comes
on again.
Manual tuning can be ended at any time by
pressing one of the frequency selection keys
or by not pressing any key for 60 seconds.
Listening to stored stations.
Select the required band using key BN
Press one of the frequency selection keys.
The display shows the key that has been
pressed and the station code if it is an RDS
station.
If the selected station has an RDS service and
the reception is poor, the car radio will search
for an alternative frequency. During the search
for an alternative frequency, the
"SRC" is displayed.
Weekend
99 Range
( D
message
Print n° 506.763/17