Engine
Fuel system
50
Marea- Marea Weekend ft>
- disconnect the pressure and air temperature
sensor connector (2)., the injector cable con-
nector (1) and remove the charcoal filter in-
take pipe (3);
- partly raise the half manifold and remove the
brake servo vacuum intake pipe (arrow);
- disconnect the rapid connector (4), undo the
fixing bolts (5) then remove the complete
fuel manifold.
When refitting, reverse the order of the opera-
tions carried out for the removal.
Removing-refitting injectors
To remove the injectors, proceed as follows:
- Disconnect the electrical connection (1).
- Remove the safety clip (2).
- Remove the injecor (3) which is a press fit.
Never act on the electrical connector
to remove the injector.
Before refitting, check the condition
of the seals.
99 range
Print n°
506.763/14