Piper Turbo Saratoga PA-32-301T Pilot's Manual page 314

SECTION 9
PIPER AIRCRAFT
CORPORATION
SUPPLEMENTS
PA-32-301T,
TURBO SARATOGA
If the D-Bar is less than 2 to 3 dots: the
HDG
mode will
disengage upon selecting APR mode; the APRannun-
ciator will
illuminate steady and the capture/track
sequence will automatically begin.
b.
When equipped with
DG
l. OBS Knob
-
SELECT desired
approach
course.
2. APR Mode Selector Button
-
PRESS.
3.
Heading Selector
Knob
-
ROTATE Bug to agree with
OBS
course.
NOTE
When APR is selected,
the
lateral
operating
mode will change from HDG
(if
selected)
to
wings level
for
5 seconds. A 45° intercept
angle
will then be automatically established based on
the position of the
bug.
If the D-Bar is greater than 2
to
3 dots: the autopilot
will annunciate
HDG mode
(unless
HDG not selected)
and APR flashing; when the computed
capture
point
is
reached the HDG annunciator will go out, the
APR
annunciator
will
illuminate steady and
the
selected
course will be automatically captured and
tracked.
IftheD-Barislessthan2to3dots:theHDGmodewill
disengage
upon selecting APR mode; the APR annun-
ciator will illuminate
steady
and the capture
track
sequence will automatically begin.
(8)
BC Approach
Coupling
a.
When equipped
with HSI
1. Course
Bearing Pointer
-
SET to the ILS front course
inbound
heading.
NOTE
When equipped with NAV 1 NAV 2
switching
and
ÑAV
2 is
selected,
set
OBS tothe ILSfront
course
inbound heading.
REPORT:
VB-1070
ISSUED: AUGUST
6, 1982
9-90