Piper Turbo Saratoga PA-32-301T Pilot's Manual page 312

SECTION 9 PIPER
AIRCRAFT CORPORATION
SUPPLEMENTS
PA-32-301T,
TURBO SARATOGA
b.
Heading Hold
l.
Heading
Selector Knob - SET BUG to desired heading.
2. HDG Mode Selector Button - PRESS. Note HDG
mode annunciator
ON. Autopilot will automatically
turn the aircraft to the selected heading.
c.
Command Turns (Heading Hold mode ON)
HEADING Selector
Knob
-
MOVE
BUG
to the desired
heading. Autopilot will automatically turn the aircraft to
the
new
selected heading.
(6)
NAV Coupling
a.
When equipped with HSl.
1.
Course Bearing Pointer
-
SET to desired course.
NOTE
When equipped
with NAV l NAV 2 switching
and NAV 2 is selected, set OBS to the desired
course.
2.
HEADING Selector Knob - SET
BUG
to provide
desired intercept angle.
3. NAV
Mode Selector Button
-
PRESS.
If the Course
Deviation Bar is
greater than 2
to
3 dots:
the aircraft will continue in HDG mode
(or
wings
level
if HDG
not
selected) with the NAV annunciator
flashing; when the computed capture point is reached
the HDG
will disengage, the NAV annunciator will
illuminate
steady and the selected course will be auto-
matically captured and tracked.
If the D-Bar is less than 2 to 3 dots: the HDG mode will
disengage
upon
selecting NAV
mode;
the NAV
annunciator
will illuminate steady and the capturej
track sequence
will automatically begin.
b. When
equipped with
DG
1.
OBS
Knob
-
SELECT desired course.
2.'
NAV Mode Selector Button
-
PRESS.
REPORT:
VB-1070 ISSUED: AUGUST 6, 1982
9-88