Locating a Physical Drive
This function requires the LCD to be in Advanced mode. See page 184. This
feature helps you identify a physical drive in the VessRAID enclosure.
To locate a physical drive:
1.
Press the
Management.
2.
Press the
3.
Press the
4.
Press the
5.
Press the
6.
Press the
one minute. See Figure 2.
Figure 2. Disk Status LED
Managing Disk Arrays
Disk Array Management in the LCD includes the following functions:
•
Creating a Disk Array – Automatic (page 192)
•
Creating a Disk Array – Advanced (page 193)
•
Deleting a Disk Array (page 195)
•
Viewing Disk Array Information (page 195)
•
Locating a a Disk Array (page 196)
•
Creating a Logical Drive (page 197)
•
Deleting a Logical Drive (page 198)
•
Viewing Logical Drive Information (page 198)
•
Locating a a Logical Drive (page 199)
For other disk array functions, see "Managing Disk Arrays" on page 98 (WebPAM
PROe) or page 140 (CLU).
or
button until the display says Physical Drive
button and the display a list of physical drives by ID number.
or
button to scroll through the list of physical drives:
button choose a physical drive.
or
button until the display says Locate Physical Drive.
button. The disk status LED for the physical drive blinks for
191
Managing Disk Arrays
Disk Status