4.
Lay the RAID Controller on a non-static surface and remove the cover
attaching screws, one on each side, then remove the cover.
See page 211, Figure 3.
5.
Remove the battery assembly attaching screw on the outside of the RAID
controller housing.
6.
Detach the battery connector and remove the battery assembly.
Figure 6. RAID Controller cache battery
Attaching
screw (on
controller
housing)
Battery
assembly
Slot
7.
Attach the connector of the new battery assembly.
Be careful to line-up the connector pins correctly. See Figure 7.
Figure 7. Battery connector pins
213
Chapter 7: Maintenance
Battery
Connector
Row A
Row B
Row B
Row A