PIN menu
16.4 Operating data
Here, you can:
view all operating data.
How to access the operating data:
Enter the PIN menu
Press the button
Press the back button (1) to exit the menu.
16.5 Hygiene logbook
In the hygiene logbook, you can:
call up all operating statuses, actions and malfunctions during a day in chronological order.
call up all HACCP and hygiene-related data.
The list starts with the current date and the first event on this day. Then the subsequent events of this day
are displayed and then the events from previous days. The most important operating data is summarised at
the end of each day.
Together with a service technician authorised by Winterhalter, you can define which data is to be stored. On
request, you can have deviations from the rated values displayed on the screen so that you can respond to
malfunctions in good time.
A table with the factory settings can be found in point 18.1 Technical data.
INFO: Once the memory capacity has been exhausted, the oldest data is deleted as soon as new data is
added.
1
This function is not activated in factory.
36
The screen (screen 21) with the operating data appears.
Initial start-up
Next service in
Total operation hours
Total washing cycles
Total water consumption
Op. hours/day
Washing cycles/day
Screen 21
Water consump./day
WS remaining capacity
Old master operation hours
You can scroll up and down the list using buttons and .
PIN 1575
Date
x hours
x hours
x
x litres
x hours
x
x litres
x litres
x hours
1