Operation; Switching On; Before Switching On The Machine; Switching The Machine On And Preparing It So That It Is Ready For Operation - Winterhalter UC Series Operating Instructions Manual

10 Operation

10.1 Switching on

10.1.1

Before switching on the machine

 Open the on-site water stop cock.
 Switch on the on-site mains disconnector.
 For your own safety, test the on-site residual-current circuit breaker (RCCB) by pressing the test button.
 Open the machine door and check whether the wash fields (top and bottom) and the filters (strainer, filter
cylinder) are installed.
 Close the machine door.
When using chemicals, adhere to the safety notes and recommended dosages printed on the
packaging.
Wear protective clothing, protective gloves and protective goggles when handling chemicals.
Warning
Do not mix different detergent products.
 Check whether there is detergent and rinse aid in the storage tanks (integrated in the machine or
external). Top them up in time or replace the storage tanks so that the cleaning result will not be
negatively affected.
10.1.2

Switching the machine on and preparing it so that it is ready for operation

This is where you learn how to prepare switch on and prepare the machine so that it is ready for operation.
You can select to program the machine to switch on automatically at a certain time ( 16.3) and be ready for
operation approximately 15 - 25 minutes later (depending on the water inlet temperature).
 Touch the screen with your
finger.
 Screen 01 appears.
 The machine's tank is
automatically filled and
heated at the same time.
 Detergent is dosed into the
machine's tank (assuming a
dosing device is
connected).
1
The display of washing programmes depends on the purpose for which the machine has been programmed.
You will find an overview of the possible displays on pages 14 and 15.
 Press and hold the on button
(1) for approx. 2 seconds.
 Screen 02 appears with the
welcome message.
 The machine is ready as
soon as the rated
temperatures have been
reached.
 The start button lights up
green and the washing
programmes are
1
displayed .
Screen 01
The welcome message
disappears automatically after a
short time.
Operation
Screen 02
15