Winterhalter UC Series Operating Instructions Manual page 2

Short instructions
IMPORTANT: Read the detailed operating instructions and safety notes before first use.
Switching on the machine
 Touch the screen with your
finger.
 Screen 01 appears.
 The machine's tank is auto-
matically filled and heated at
the same time.
 Detergent is dosed into the
machine's tank (assuming a
dosing device is connected).
Loading dishes
Starting the washing programme
 Press the start button (2) to start the washing programme.
 The start button (2) first lights up in blue and then gradually turns to green to indicate the progress of
the washing programme.
 The start button (2) flashes green as soon as the washing programme has been completed.
 On machines with integrated exhaust air heat recovery the start button (2) flashes green and blue
whilst vapours are extracted.
Removing dishes
Switching off the machine
 Press and hold the button (3) for approximately 2 seconds to start the self-cleaning programme.
 The inside of the machine is cleaned and finally drained.
 The start button (2) lights up blue and switches off in three steps as the self-cleaning programme
progresses.
 The machine switches off.
1
The display of washing programmes depends on the purpose for which the machine has been programmed.
 Press and hold the on button
(1) for approximately 2 seconds
 Screen 02 appears.
 The machine is ready as soon
as the rated temperatures have
been reached.
 The start button lights up green
and the washing programmes
1
are displayed .
Screen 01
The welcome message
disappears automatically after a
short time.
1 Washing programmes
The washing programme
with the white background
is selected.
2 Start button
3 Self-cleaning programme
Screen 02
1