Loading Dishes - Winterhalter UC Series Operating Instructions Manual

Display for bistro dishwashing machines
Display for cutlery rinsing machines
10.2.2

Loading dishes

 Adhere to the following guidelines when loading the washing rack with dishes and cutlery:
 Remove any larger food residue.
An excessive level of soiling can clog the filter system and hamper the washing programme
sequence.
Caution
 Place the plates into the rack with the top facing the front.
 Load cups, bowls and pots with the opening facing downwards.
 Wash the cutlery either upright in the cutlery holders or lying in a flat rack. Make sure that the dishes are
not too closely packed. Soak the cutlery before you wash it.
 Place knives and other sharp and pointed cutlery items with the handle at the top to avoid injuries.
 Adhere to the following guidelines when loading the washing rack with glasses:
 Pour away any left-over drink (do not pour into the machine).
 Remove any paper waste.
 Rinse off any ash with water.
 Load glasses with the opening facing downwards.
 Space the glasses so that they do not touch. This prevents scratching.
 For tall glasses, select a rack with the appropriate divisions so that the glasses are held in a stable
position.
Do not wash any items with wax residue (e.g. candlesticks). The drain pump may be damaged
by hardened wax.
Caution
 After pushing in the washing rack, check whether the top and bottom washing fields rotate freely.
Arranged from left to right:
Programme 1
for glasses
Programme 2
for glasses and cups
Programme 3
for plates
Operation
17