Cleaning The Inside Of The Machine - Winterhalter UC Series Operating Instructions Manual

11.1.3

Cleaning the inside of the machine

When performing daily cleaning, make sure that no foreign objects which may rust have been
left in the interior of the machine. These objects can even cause "stainless steel" material to
rust. Rust particles may originate from non-stainless steel dishes, cleaning aids, damaged wire
Caution
racks or water pipes with no corrosion protection.
Open the machine door and
remove the washing rack from the
machine
Remove the filter cylinder
Attention! Make sure that the red
valve rod in the suction duct of the
washing solution circulation
system is not a foreign body
which has to be removed.
Unlock the top and bottom
rotating wash fields
Remove the strainer
Remove any soiling from the
interior of the machine with a
brush or a cloth
Clean the labyrinth below the door
Maintenance and care
Remove both rotating wash fields
from the machine
Remove the bottom section of the
filter
21