Manual Sheet Feeder Removal; Paper Feed Motor Removal; Paper Lifters Removal - Lexmark Optra Color 45 Service Manual

4080-001

Manual Sheet Feeder Removal

1. Remove the input / output tray assembly.
2. Remove all covers, refer to
3. Disconnect the operator panel cable and note the routing.
4. Depress the manual guide clip on the right side frame and
remove the guide from the rear of the printer.

Paper Feed Motor Removal

1. Remove the input / output tray assembly.
2. Remove all covers, refer to
3. Disconnect the paper feed motor cable from the controller board
at (CN6).
4. Remove the two screws from the left frame and remove the
paper feed motor, refer to

Paper Lifters Removal

1. Remove the input / output tray assembly.
2. Remove all covers, refer to
3. Disconnect the operator panel cable and note the routing.
4. Remove the gear box assembly, refer to the
Assembly Removal" on page
5. Remove the screw securing the paper tray to the paper lift
assembly.
6. Remove the screws from each end of the hinge shaft.
7. Remove the screws from each end of the plastic side lifter rail.
8. Remove the hinge shaft and the left and right paper lifters.
4-16
Service Manual
"Covers and Doors" on page
"Covers and Doors" on page
"Frames" on page
"Covers and Doors" on page
4-15.
4-3.
4-3.
4-10.
4-3.
"Gear Box