User Error Messages - Lexmark Optra Color 45 Service Manual

4080-001

User Error Messages

Message
30 Cartridges Missing:
• Color
• Black
• Photo
38 Memory Full
51 Defective Flash
53 Unformatted Flash
54 Serial Option x Error
Explanation
Press the Go button to clear the error. At this
point the Supplies status appears on the
display and the cartridge missing shows in the
supplies menus. This remains until the user
accesses the Tests Menu to install a cartridge
and fill the empty slots. If a print job is sent
while in this state, it may result in poor print
quality since the job most likely requires the
missing cartridge.
Press Go to clear the message and continue
processing the job. Some data will be lost. You
must allow additional memory to complete your
print job by:
• Deleting fonts, macros and other data in
RAM.
• Simplifying your print job.
• Installing additional memory.
Press Menu> or Menu< to access the reset
function in the Busy/Waiting Menu group.
Menu Lockout does not prevent access to the
Busy/Waiting Menu group. The menu buttons
are not active when Reset Control is Off.
Press Go to clear the message and continue
processing the job. All downloaded fonts and
macros not written to flash will be deleted.
Press Menu> or Menu< to access the reset
function in the Busy/Waiting Menu group.
Menu Lockout does not prevent access to the
Busy/Waiting Menu group. The menu buttons
are not active when Reset Control is Off.
Press Go to clear the message. The flash will
be marked as bad and normal operation will
continue. Flash operations will not be allowed
until the flash is formatted.
This error indicates that the serial port has
been improperly set.
Diagnostic Information
2-27