4080-001
Maintenance Station Assembly Removal
1. Remove the input / output tray assembly.
2. Remove all covers, refer to
3. Remove the two screws at the rear of the maintenance station
and remove the maintenance station.
Wipers and Caps Removal
1. Remove the input / output tray assembly.
2. Remove all covers, refer to
3. Remove the maintenance station assembly, refer to the
"Maintenance Station Assembly Removal" on page
4. Remove the wipers and caps.
Note: Be sure the wipers are completely seated.
4-32
Service Manual
"Covers and Doors" on page
"Covers and Doors" on page
4-3.
4-3.
4-32.