Lexmark Z65 Information Update

Lexmark z65: install guide

Hide thumbs Also See for Z65:

Cartridge packaging

Foam has been added to the packaging to give the cartridges extra protection during shipping.

Note: Remove the foam, sticker, and tape before installing your cartridges.

This section replaces the information regarding the paper dimensions for printing from paper tray 1 in

the User's Guide.

From paper tray 1, you can print on any supported paper type, such as plain, coated, photo, or glossy

paper, transparencies, envelopes, labels, iron-on transfers, or banner paper. Your paper must be within

these dimensions:

Width:

76.2 to 215.9 mm (3.0 to 8.5 in.)

Length:

127 to 432 mm (5.0 to 17.0 in.) for Windows

127 to 355.6 mm (5.0 to 14.0 in.) for Macintosh

Note: Banner paper may be longer than the dimensions listed above.

The paper exit tray can hold up to 150 sheets of plain paper when the printer and the paper exit tray

are both placed on one level surface.

Table of Contents

Do you have a question about the Z65 and is the answer not in the manual?

Page 1 Note: Banner paper may be longer than the dimensions listed above. Paper exit tray capacity The paper exit tray can hold up to 150 sheets of plain paper when the printer and the paper exit tray are both placed on one level surface.
Page 2 Installing additional listed printers for Windows These steps replace the steps for installing additional listed printers for Windows in the Lexmark Z65n Color Jetprinter User’s Guide. After installing the first printer on your network computer, complete the following process for each additional listed printer you want to install.
Page 3 Cancel and complete the following steps to make your replacement printer work properly. Select and drag the Lexmark Z65 desktop printer icon (the icon for your old printer) to the trash can. From the Apple menu, choose Control Panels From the Printer Selection screen, select your replacement printer.
Page 4 From the Alignment Screen, select Automatic Alignment and click Continue. From the Alignment Status dialog box, follow the instructions on the screen. After completing alignment, click the button in the upper left to close the Lexmark Z65 dialog box. Mac OS X version 10.0.3 to 10.1 Make sure your computer is on.

Z65n color jetprinter Consumer inkjet