4080-001
Mid Frame Assembly Removal
1. Remove the input / output tray assembly.
2. Remove all covers, refer to
3. Remove the carrier frame assembly, refer to the
Frame Assembly Removal" on page
4. Remove the right side frame, refer to the
Assembly Removal" on page
Right Side Frame Assembly Removal
1. Remove the input / output tray assembly.
2. Remove all covers, refer to
3. Remove the carrier frame assembly, refer to the
Frame Assembly Removal" on page
4. Remove the two screws securing the small feed roller spring
connector rail and remove the rail. Refer to
page
4-10.
5. Remove the two screws securing the star roller assembly, refer
to the
"Star Roller Assembly Removal" on page
6. Remove the three screws from the right side frame and remove
the frame.
"Covers and Doors" on page
4-11.
"Right Side Frame
4-13.
"Covers and Doors" on page
4-11.
Repair Information
"Carrier
"Carrier
"Frames" on
4-17.
4-3.
4-3.
4-13