Printer Setup; Setting The Page Count; Viewing The Permanent Page Count - Lexmark Optra Color 45 Service Manual

4080-001

Printer Setup

Setting the Page Count

This lets the servicer change the page count from the diagnostic
menu. This is used whenever the engine board is replaced because
this board contains the printer's NVRAM Memory where the page
count is stored.
To set the Page Count:
1. Select Printer Setup from the Diagnostic menu.
2. Select Page Count from the Diagnostic menu.
a. The current page count displays.
b. The leftmost digit blinks, indicating it is the first digit to be
changed.
3. Press either Menu> or <Menu until the value you want displays.
4. Press Select to move to the next digit, press Menu> or <Menu
until the value you want displays. Continue with each digit until
you set the page count. You can skip any digit by pressing
Select.
5. Press Select to save the new page count in NVRAM.
6. Press Return/Stop to exit.

Viewing the Permanent Page Count

The Permanent Page Count can only be viewed and cannot be
changed.
To view the Permanent Page Count:
1. Select Permanent Page Count from the menu.
2. Press Return/Stop to exit.
Diagnostic Aids
3-11