Mechanical Mounting; Mounting The Scanner - Datalogic DS6300 Reference Manual

Hide thumbs Also See for DS6300:

Table of Contents

2.2 MECHANICAL MOUNTING

The DS6300 reader can be positioned and installed in the best way possible as a result of the

Step-a-Head™ feature. Thanks to the separation between Head and Base, you can modify

the orientation of the decoder base, and therefore display-keypad and connector panels, while

keeping the optic head in the correct reading position. The reading head and the decoder base

can be rotated independently from each other allowing the installation even in the most critical

locations.

o rotate the head follow the given procedure:

. detach the head from the base by unscrewing the four fixing screws;

. rotate the head in the desired position;

3. loosen but don't remove the two screws on top of the head;

4. affix the head onto the base carefully aligning the four fixing screws and progressively

tightening them about half-way;

5. completely tighten the two screws on top of the head;

6. completely tighten the four fixing screws.

Head Screws

Figure 7 - Step-A-Head™ Feat ure

DS6300

Fixing Screw (4)

Table of Contents