Datalogic DS6300 Reference Manual page 61

INSTALLATION
The following image shows a system consisting of six readers where:
•
the system is powered by the PWR-240
•
the master and all slaves are connected together through the CAB-610X cables
•
the external signals (trigger, encoder, serial to host, etc.) are connected to the master
through the C-BOX 100
•
one or more slaves are connected through CAB-63XX. The last slave must be terminated
with the BTK-6000
Slave 2
CAB-610X
Slave 5
* P.S. (Presence Sensor) connected to External Trigger/PS input.
** C-BOX 100 modified to accept scanner power.
*** Encoder connected to IN2/ENC input.
Figure 58 – Small Synchronized Network with more than 2 Readers and Single Power Unit
If a single power source is used, it is not necessary to separate groups of
scanners with "no power" cables (CAB-611X).
NOTE
Slave1
CAB-610X CAB-610X
CAB-610X
CAB-610X
BTK-6000
Slave 4
CAB-63XX
Master
C-BOX 100**
BTK-6000
CAB-60XX
CAB-63XX
Slave 3
PWR-240
2
PS*
Encoder***
Host
45