Installation; Mechanical Mounting; Mounting The Scanner - Datalogic DS6300 Reference Manual

INSTALLATION

2 INSTALLATION
To install the system follow the given procedure:
•
Select the mounting location for DS6300;
•
Mount the DS6300 scanner;
•
Proceed with system electrical connection;
•
Position the scanner with respect of the barcode;
•
Install the Genius™ program on the PC;
•
Adjust the focus position to the reading plane of the barcode.
If your system requires the DS6300 reader to be connected to C-BOX100
refer to Appendix A for details.
NOTE

2.1 MECHANICAL MOUNTING

2.1.1

Mounting the Scanner

The DS6300 reader can be positioned and installed in the best way possible as a result of
the Step-a-Head™ feature. Thanks to the separation between Head and Base, you can
modify the orientation
display-keypad and connector panels, while keeping the optic head in the correct reading
position. The reading head and the decoder base can be rotated independently from each
other allowing the installation even in the most critical locations.
of the decoder
Figure 17 - Step-A-Head™ Feature
base, and therefore
2
13