INSTALLATION
2.3.4 DeviceNet Connector
When using DeviceNet, the Main serial interface is disabled and must not
be physically connected.
NOTE
The 5-pin male connector is only available in the DS6300 DeviceNet model and allows
connection between the host and the reader:
P
in
2
5
1
4
3
The power supplied on pin V+ and V- is used only to propagate power to
the section of the DeviceNet board directly connected to the Bus. It is
completely isolated from the DS6300 power which must be supplied on
pin 9, 13 and pin 23, 25 of the 26-pin Main/Aux connector.
NOTE
4
5
1
Figure 42 - DeviceNet 5-pin Male Connector
DS6300
5-pin D
evic
Name
V +
CAN_L
SHIELD
CAN_H
V -
3
2
eNet connector pinout
Functio
n
Supply voltage – positive pin
CAN bus data line – L
Shield
CAN bus data line – H
Supply voltage – negative pin
2
31