Installation; Package Contents - Datalogic DS6300 Reference Manual

INSTALLATION

2 INSTALLATION
To install the system follow the given procedure:
• Select the mounting location for DS6300;
•
Mount the DS6300 scanner;
• Position the scanner with respect of the barcode;
• Proceed with system electrical connection;
•
Install the GENIUS™ program on the PC;
• Adjust the focus position to the reading plane of the barcode.
When installing several scanners, take care to position them correctly so
that no laser beam enters the reading window perpendicularly and at the
same level of the output beam of the other scanners. This condition could
occur more frequently for side mounted applications. If these precautions
are not followed, it may occur that the laser of the blinded scanner starts
blinking due to an internal circuit which temporarily turns the laser off
WARNING
when detecting a power anomaly. To resolve this problem, it is sufficient
to slightly change the inclination and position of one of the two scanners
involved.
Refer to the Reference Documentation for details on connecting
DS6300 reader to other devices in the system (i.e. C-BOX 100 etc.).
NOTE

2.1 PACKAGE CONTENTS

Ve ify that the DS6300 reader and all the parts suppli r
intact when opening the packaging; the list of parts includes:
•
DS6300 reader
•
Installation Quick Reference +
•
DS6300 configuration CD-ROM
•
Mounting bracket and screws
barcode test chart
Figure 6 - DS6300 Package Contents
ed with the equipment are present and
2
your
7