Datalogic DS6300 Reference Manual page 46

2
Ethernet Interface
The Ethernet interface (NIC) can be used for TCP/IP communication with remote or local
host computer by connecting the scanner to a LAN as well as with a host PC directly
connected to the scanner.
The following is an example of a connection to a LAN through a Hub using a straight through
cable:
The following is an example of direct connection to a PC using an inverted cable:
For further details refer to the "Ethernet.pdf" document provided as supplementary
documentation.
30
DS6300
TX+ 1
2
TX-
RX+ 3
n. c.
4
n. c.
5
RX- 6
n. c. 7
n. c.
8
n. c. = not connected
Figure 40 – Straight Through Cable
DS6300
1
2
3
4
5
6
7
8
Figure 41 – Inverted Cable
HUB / SWITCH
1
2
3
4
5
6
7
8
Host PC
3
6
1
4
5
2
7
8
DS6300