Printing Slows Down Dramatically During Continuous Printing; Cannot Cancel Printing From A Computer Running Mac Os X V10.6.8; Other Problems; Slight Electric Shock When Touching The Printer - Epson WF-7211 User Manual

User's Guide

Printing Slows Down Dramatically During Continuous Printing

Printing slows down to prevent the printer mechanism from overheating and being damaged. However, you can
continue printing. To return to normal printing speed, leave the printer idle for at least 30 minutes. Printing speed
does not return to normal if the power is off.

Cannot Cancel Printing from a Computer Running Mac OS X v10.6.8

If you want to stop printing from your computer, make the following settings.
Run Web Config, and then select Port9100 as the Top Priority Protocol setting in AirPrint Setup. Select System
Preferences from the
then add the printer again.

Other Problems

Slight Electric Shock when Touching the Printer

If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer.
Install a ground wire to the computer that is connected to the printer.

Operation Sounds Are Loud

If operations sounds are too loud, enable Quiet Mode. Enabling this feature may reduce printing speed.
❏ Windows printer driver
Enable Quiet Mode on the Main tab.
❏ Mac OS printer driver
Select System Preferences from the
select the printer. Click Options & Supplies > Options (or Driver). Select On as the Quiet Mode setting.

Rear Paper Feed Slot is Removed

Reattach the rear paper feed slot by holding vertically shown as below.
Solving Problems
menu > Printers & Scanners (or Print & Scan, Print & Fax), remove the printer, and
menu > Printers & Scanners (or Print & Scan, Print & Fax), and then
134