Functional Components; Intended Use - Gerima SMA 50?E1 Operating Manual

3. Description of machine
3
2
1
1 On/Off switch
2 Switch lock
3 Speed adjustment
4 Motor
5 Spindle lock
6 Guide plate
To avoid injury and damage to health, please
observe the following:
The machine may only be used for work and ma‐
terials described in the section 'Intended use'.
Do not use the machine to work on
materials containing asbestos
Functional components
4 5
6
.
7
8
9
7 Grip
8 Milling head with DL guide bearing
9 Height clamping screw
10 Vernier scale on collar
11 Main scale
Intended use:
The GERIMA SMA 50‐E is a hand‐held, electrically
powered milling machine intended:
•
for machining workpieces made of steel,
cast steel, fine‐grained steel, stainless
steel, aluminium, aluminium alloys, brass
and plastics;
•
for commercial use in industrial settings
and in the skilled trades;
•
for preparing K, V, X and Y‐shaped welding
grooves;
•
for creating visible edges in plant and me‐
chanical engineering work;
•
for edge rounding to prepare materials for
painting or coating or as impact protection
8
V.02 .22.03.10.ENG
11
10