Adjusting The Bevel Height; Changing The Milling Head - Gerima SMA 50?E1 Operating Manual

1. Quick reference guide
Working direction:
Always mill against the direction of rotation of
the milling head ('up‐cut milling')
Move machine ONLY in the direction of the
arrow!
Adjusting bevel height (a):
The bevel height (a) – see page 12 – is set by ad‐
justing the height of the machine's guide plate.
The height setting can be read from the fixed
main scale and the vernier collar.
1
2
1. Release clamping screw
2. Rotate the guide plate until the required
bevel height has been set as shown by the
fixed main scale in combination with the
4
vernier collar .
3
3. Re‐tighten locking screw .
4. Check bevel height on workpiece and readjust
as necessary.
Quick reference guide
4
3
1
2
1
1
Changing the milling
head:
Lock spindle
2
3
4
5
4
V.02 .22.03.10.ENG
6
7
8
9