Specific safety instructions:
Warning
Risk of injury to hands!
•
Do not place your hand near the milling
head.
•
Always hold the machine with two hands.
Caution
Improper use can damage equipment and
property!
•
Risk of machine being damaged or de‐
stroyed.
•
Never lift or carry the machine by its
power cable.
•
Make sure the cable is directed behind
and away from the machine. Do not lay
the cable over sharp edges.
•
Servicing and testing must only be carried
out by appropriately qualified technicians.
•
Always use genuine GERIMA spare
parts and accessories.
Safety information
Warning
Risk of injury from hot metal chips
•
Hot chips are ejected from the machine at
high speed.
•
Use the chip bin.
Warning
Improper use can cause serious injury!
•
Make sure you always have a firm footing
when working with the machine.
•
Never touch the milling head when the ma‐
chine is running.
•
Never use the machine above head height.
•
The machine should only be used for con‐
ventional up‐cut milling.
Important
The manufacturer reserves the right to make
technical changes.
7
V.02 .22.03.10.ENG