Table of Contents
Advertisement
PS/2 Mouse Function Control [Auto]
The default of [Auto] allows the system to detect a PS/2 mouse on startup. If detected, IRQ12 will be
used for the PS/2 mouse. IRQ12 will be reserved for expansion cards only if a PS/2 mouse is not
detected. [Enabled] will always reserve IRQ12, whether on startup a PS/2 mouse is detected or not.
Configuration options: [Enabled] [Auto]
OS/2 Onboard Memory > 64M [Disabled]
When using OS/2 operating systems with installed DRAM of greater than 64MB, you need to set
this option to [Enabled]; otherwise, leave this on [Disabled]. Configuration options: [Disabled]
[Enabled]
4.4.1 Chip Configuration
Advanced ...
Chip Cofiguration
Video Memory Cache Mode
Onboard PCI IDE Enable
F1
Help
↑↓
Select Item
ESC Exit
←→
Select Menu
Video Memory Cache Mode [UC]
USWC (uncacheable, speculative write combining) is a new cache technology for the video memory
of the processor. It can greatly improve the display speed by caching the display data. You must set
this to UC (uncacheable) if your display card cannot support this feature; otherwise your system
may not boot. Configuration options: [UC] [USWC]
Onboard PCI IDE Enable [Both]
You can select to enable the primary IDE channel, both the primary and secondary channels, or
disable both channels. Configuration options: [Both] [Primary] [Disabled]
4. BIOS SETUP
[UC]
[Both]
-/+
Change Values
Enter Select Ê Submenu
D1260 CUR-DLSR User's Manual
Item Specific Help
F5 Setup Defaults
F10 Save and Exit
49
Advertisement
Table of Contents
