Summary of Contents for Fujitsu Siemens Computers D1239
Page 1
S Y S T E M B A U G R U P P E D 1 2 3 9 S Y S T E M B A U G R U P P E D 1 2 3 9 S Y S T E M B A U G R U P P E D 1 2 3 9 S Y S T E M B A U G R U P P E D 1 2 3 9 S Y S T E M B O A R D D 1 2 3 9...
Page 2
Sie haben ..technische Fragen oder Probleme? Wenden Sie sich bitte an: • unsere Hotline: Mo-Fr: 9 - 18 Uhr 9 - 14 Uhr Tel.: ++49 (0) 180 3777 000 • Ihren zuständigen Vertriebspartner • Ihre Verkaufsstelle Weitere Informationen finden Sie im Handbuch "Sicherheit, Garantie und Ergonomie". Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw.
Page 4
Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH A26361-D1239-Z120-1-7419 A26361-D1239-Z120-1-7419 A26361-D1239-Z120-1-7419 A26361-D1239-Z120-1-7419 Bestell-Nr./Order No.:...
Page 5
Deutsch English Systembaugruppe D1239 System Board D1239 Technisches Handbuch Technical Manual Ausgabe Januar 2001 January 2001 edition...
Page 6
Dieses Handbuch wurde erstellt von cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de Copyright ã Fujitsu Siemens Computers GmbH 2001 Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
Please note the information provided in the "Safety" chapter in the device’s Operating manual. Incorrect replacement of the lithium battery may lead to a risk of explosion. It is therefore essential to observe the instructions in the "Add-on modules" - "Replacing the lithium battery" section. English - 1 A26361-D1239-Z120-2-7419...
• Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. 2 - English A26361-D1239-Z120-2-7419...
3 DIMM slots for up to 3 GB main memory (DDR-DRAM memory modules meet the PC200/PC266 specification) with ECC • Flash BIOS • Fujitsu Siemens system monitoring and temperature monitoring • Energy saving functions: − APM and ACPI (requires an operating system that supports ACPI) −...
Page 12
This interface can also be used as a second serial port (16C550 compatible with FIFO). • 1 internal WOL interface • 2 external PS/2 ports for keyboard and mouse • 2 external USB ports • USB ports D, E, F (internal) • Real-time clock/calendar with integrated battery backup 4 - English A26361-D1239-Z120-2-7419...
4 = USB ports 1 and 2 9b = Audio Line-In 5 = Serial port 1 9c = Audio Micro-In 6 = Parallel port The components and connectors marked are not necessarily present on the system board. English - 5 A26361-D1239-Z120-2-7419...
Page 14
15 = AUX audio input loudspeaker 16 = Fan 1 (e. g. for the processor) 8 = Wake On LAN 17 = Power supply The components and connectors marked are not necessarily present on the system board. 6 - English A26361-D1239-Z120-2-7419...
In addition, any unnecessary noise is also prevented by reducing the fan speed, and information is provided about the system status. Cover monitoring protects the system from unauthorised opening. An onboard controller developed by Fujitsu Siemens Computers controls the temperature and system monitoring. The following functions are supported:...
The LAN RJ45 connector is equipped with a yellow and a green LED (light emitting diode). 1 = Yellow indicator 2 = Green indicator Green a connection exists (e. g. to a hub). Yellow Link Mode: the LAN connection is active. WOL mode: a Magic Packet is being received. 8 - English A26361-D1239-Z120-2-7419...
BIOS Setup must be disabled (in menu Security, the field Diskette Write must be set to Enabled). The floppy disk drive is write-protected. Floppy disks can be read, written and deleted (default setting). English - 9 A26361-D1239-Z120-2-7419...
5 = Lithium battery 2 = Location bank 1 for main memory 6 = PCI slots 1, 2, 3 3 = Location bank 2 for main memory 7 = AGP slot 4 = Location bank 3 for main memory 10 - English A26361-D1239-Z120-2-7419...
The angled corner of the processor may be covered by the heat sink. In this case let yourself be guided by the marking in the rows of pins on the underside of the processor. Ê Push the lever back down until it clicks into place (5). English - 11 A26361-D1239-Z120-2-7419...
At the same time flip the lateral holders upwards until the memory module snaps in place (2). Removing a memory module Ê Push the clips on the right and left of the compartment outward (1). Ê Carefully remove the memory module from the compartment (2). 12 - English A26361-D1239-Z120-2-7419...
5 V auxiliary voltage of at least 1 A. If the system board was not already incorporated in a device when you bought it you must check whether your power supply can provide the auxiliary voltage. You may find further information in the supplied description of the network board. English - 13 A26361-D1239-Z120-2-7419...
The following graphic representation is also valid if the lithium battery is built-in vertically. Ê Lift the contact (1) a few millimetres and remove the battery from its socket (2). Ê Insert a new lithium battery of the same type into the socket (3). 14 - English A26361-D1239-Z120-2-7419...
Graphics and Memory Controller SVGA Super Video Graphic Adapter Graphics Performance Universal Serial Bus Accelerator Inter Integrated Circuit Video Graphic Adapter IAPC Instantly Available Power Wake On LAN Managed Desktop PC Design I/O Controller Hub Intelligent Drive Electronics English - 15 A26361-D1239-Z120-2-7419...
Page 24
Information on this document On April 1, 2009, Fujitsu became the sole owner of Fujitsu Siemens Compu- ters. This new subsidiary of Fujitsu has been renamed Fujitsu Technology So- lutions. This document from the document archive refers to a product version which was released a considerable time ago or which is no longer marketed.
Need help?
Do you have a question about the D1239 and is the answer not in the manual?
Questions and answers