Table of Contents
Advertisement
SCSI/Host RAID configuration utility
The BIOS of the onboard U320 SCSI controller includes a menu-driven SCSI/Host RAID
configuration programme. This programme allows you to change almost all of the option settings of
the SCSI controller.
When you boot the system a SCSI/Host RAID-BIOS message listing the SCSI devices connected is
displayed.
If an SCSI/Host RAID-BIOS error message appears or problems arise with SCSI devices,
i
please read the documentation of your SCSI device.
If you are unable to trace or rectify the error, please contact your dealer or our customer
service centre.
Working with the keyboard
Use the following keys when running the programme:
ËÊ
to make selections
Ú
to accept a selection
[ESC]
to call the previous menu and to terminate the SCSI configuration programme.
[F6]
to reset to the default settings. This function is not possible in all menus.
Starting the SCSI/Host RAID configuration programme
Ê
Start the PC, if the following message appears, press the key combination [Ctrl] and [A]:
Press <Ctrl> <A> for SCSI Select (TM) Utility!
In the first menu the available U320 SCSI controller are displayed. The onboard SCSI controller of
D1409 is displayed with the following entry:
When choosing the AIC-7902 you are taken to the top level of the configuration menu of this
controller. The following options cannot be displayed.
Host RAID is disabled (default):
Host RAID is enabled:
A26361-D1409-Z120-1-7619
AIC-7902 at slot 00 00:04:00
onfigure/View SCSI Controller Settings
C
SCSI Disk Utilities
Enable Host RAID Support
onfigure/View SCSI Controller Settings
C
Configure/View Host RAID Settings
SCSI Disk Utilities
Disable Host RAID Support
Features
English - 9
Advertisement
Table of Contents
