Table of Contents
Advertisement
4. BIOS SETUP
Onboard SCSI BIOS [Auto]
[Auto] allows the motherboard's BIOS to detect whether you have a Symbios SCSI controller. If the
Symbios SCSI controller is detected, the motherboard's Symbios BIOS will be enabled; if no
Symbios SCSI controller is detected, the onboard Symbios SCSI BIOS will be disabled. [Disabled]
will disable the motherboard's Symbios SCSI BIOS so that the BIOS on an add-on Symbios SCSI
card can be used. If your Symbios SCSI card does not have a BIOS, the Symbios SCSI card will not
function. Configuration options: [Auto] [Disabled]
ONB SCSI BIOS First [No]
This field allows giving priority to the onboard SCSI BIOS for SCSI functions over other SCSI
controllers. Configuration options: [No] [Yes]
ONB Primary SCSI Term, ONB Secondary SCSI Term [Enabled]
These fields allow you to enable or disable the onboard SCSI termination on the primary and
secondary SCSI channels. Configuration options: [Enabled] [Disabled]
ONB VGA BIOS First [No]
This field, when set to [Yes], gives priority to the onboard VGA BIOS over other VGA controllers.
Configuration options: [No] [Yes]
Onboard LAN Boot ROM [Disabled]
When set to [Enabled], this field allows your computer to boot from the network using the onboard
LAN controller boot ROM. Configuration options: [Disabled] [Enabled]
52
D1260 CUR-DLSR User's Manual
Advertisement
Table of Contents
