Table of Contents
Advertisement
3. HARDWARE SETUP
3.5.2DIMM Installation
Insert the module(s) as shown. Because the number of pins are different on either
side of the breaks, the module only fits in the orientation shown. DIMMs are longer
and have different pin contacts on each side and therefore have a higher pin density
compared to SIMMs.
CUR-DLSR 168-Pin DIMM Sockets
The DIMMs must be 3.3V "registered" for this motherboard. To determine the DIMM
type, check the notches on the DIMMs (see figure below).
The notches on the DIMM shift between left, center, or right to identify the type and
also to prevent the wrong type from being inserted into the DIMM slot on the
motherboard. Ask your retailer the correct DIMM type before purchasing.
16
CUR-DLSR
D1260 CUR-DLSR User's Manual
88 Pins
60 Pins
20 Pins
Lock
Advertisement
Table of Contents
