Fujitsu Siemens Computers D1260 User Manual page 66

4. BIOS SETUP
Plug & Play O/S [No]
This field allows you to use a Plug-and-Play (PnP) operating system to configure the PCI bus slots
instead of using the BIOS. When [Yes] is selected, interrupts may be reassigned by the OS. When a
non-PnP OS is installed or you want to prevent reassigning of interrupt settings, select the default
setting of [No]. Configuration options: [No] [Yes]
MPS 1.4 Support [Enabled]
This field allows you to enable or disable the MultiProcessor Specification 1.4 support. Configuration
options: [Disabled] [Enabled]
Boot Virus Detection [Enabled]
This field allows you to set boot virus detection, ensuring a virus-free boot sector. The system halts
and displays a warning message when it detects a virus. If this occurs, you can either allow the
operation to continue or use a virus-free bootable floppy disk to restart and investigate your system.
Configuration options: [Disabled] [Enabled]
Quick Power On Self Test [Enabled]
This field speeds up the Power-On-Self Test (POST) routine by skipping retesting a second, third,
and fourth time. Configuration options: [Disabled] [Enabled]
Boot Up Floppy Seek [Enabled]
When enabled, the BIOS seeks the floppy disk drive once during bootup. Configuration options:
[Disabled] [Enabled]
60 D1260 CUR-DLSR User's Manual