Layout Contents - Fujitsu Siemens Computers D1260 User Manual

3. HARDWARE SETUP

3.2 Layout Contents

Expansion Slots
1) DIMM 0/1/2/3
2) CPU
3) PCI
Connectors
1) PS2KBMS
2) PS2KBMS
3) USB
4) LAN
5) PRINTER
6) COM1
7) VGA
8) FLOPPY
9) IDE1/IDE2
10) WOL_CON
11) WOR
12) IDELED
13) CPU_FAN1/2,CHA_FAN1/2 p.27 CPU and Chassis Fan Connectors (Four 3-pin)
14) SMB
15) NIC (PANEL)
16) STATUS (PANEL)
17) SMI (PANEL)
18) PWRSW (PANEL)
19) RESET (PANEL)
20) PWR.LED (PANEL)
21) NMI (PANEL)
22) SPEAKER (PANEL)
23) IDELED (PANEL)
24) ATXPWR
25) SCSI-A/SCSI-B
D1260 CUR-DLSR User's Manual
p.18 168-Pin System Memory Support
p.19 Central Processing Unit (CPU)
p.20 64-bit PCI Bus Expansion Slot
p.22 PS/2 Mouse Connector (6-pin female)
p.22 PS/2 Keyboard Connector (6-pin female)
p.23 Universal Serial Bus Ports 0 & 1 (two 4-pin female)
p.23 Fast-Ethernet Connector (RJ45)
p.23 Parallel Port Connector (25-pin female)
p.24 Serial Port COM1 Connector (9-pin male)
p.24 Monitor (VGA) Output Connector (15-pin female)
p.24 Floppy Disk Drive Connector (34-1 pins)
p.25 Primary/Secondary IDE Connectors (Two 40-1 pins)
p.26 Wake-On-LAN Connector (3 pins)
p.26 Wake-On-Ring Connector (2 pins)
p.27 IDE/SCSI Activity LED (2 pins)
p.28 SMBus Connector (5-1 pins)
p.28 NIC Activity LED (2 pins)
p.28 Status Activity LED (2 pins)
p.28 System Management Interrupt Switch Lead (2 pins)
p.29ATX Power Switch/Soft Off Lead (2 pins)
p.29 Reset Switch Lead (2 pins)
p.29 System Power LED Lead (3-1 pins)
p.29 Non-Mask Interrupt Switch (2 pins)
p.29 System Warning Speaker Connector (4 pins)
p.29 IDE/SCSI Activity LED (2 pins)
p.30 ATX Power Connector (20 pins)
p.31 68-pin Ultra160/Ultra3 SCSI Connectors (two 68 pins)
13