Exit Menu - Fujitsu Siemens Computers D1260 User Manual

4.7 Exit Menu

Once you have made all of your selections from the various menus in the Setup program, you
should save your changes and exit Setup. Select Exit from the menu bar to display the following
menu:
NOTE: Pressing <Esc> does not exit this menu. You must select one of the options from this menu
or <F10> from the legend bar to exit this menu.
Exit
Exit Saving Changes
Exit Discarding Changes
Load setup defaults
Discard Changes
Save Changes
F1 Help ↑↓ Select Item
ESC Exit ←→ Select Menu
Exit Saving Changes
Once you are finished making your selections, choose this option from the Exit menu to ensure the
values you selected are saved to the CMOS RAM. The CMOS RAM is sustained by an onboard
backup battery and stays on even when the PC is turned off. Once this option is selected, a
confirmation is asked. Select [Yes] to save changes and exit.
NOTE: If you attempt to exit the Setup program without saving your changes, the program will
prompt you with a message asking if you want to save your changes before exiting. Pressing
<Enter> will then save changes while exiting.
Exit Discarding Changes
This option should only be used if you do not want to save the changes you have made to the Setup
program. If you have made changes to fields other than system date, system time, and password,
the system will ask for confirmation before exiting.
4. BIOS SETUP
-/+ Change Values
Enter Select Ê Submenu
D1260 CUR-DLSR User's Manual
Item Specific Help
F5 Setup Defaults
F10 Save and Exit
61