Table of Contents
Advertisement
Getting Ready to Connect the 2104 Model DL1
1. Referring to your preinstallation planning information, check how the 2104 is to be
connected to the using system.
2. Refer to Figure 13.
Figure 13. Setting the Box ID
3. Rotate the Box ID rotary switch to the ID you have chosen for this 2104 disk
enclosure. You need a small screwdriver to do this.
4. Find the sheet of labels supplied with your 2104 Model DL1. These are numbers 0
through 9. Select the one that represents your setting of the Box ID rotary switch
and attach it to the front of the 2104 Model DL1.
Installing a 2104 Model DL1
19
Advertisement
Table of Contents
